12v & 24v Rotary Dimmer – 8A
£15.95 Ex. VAT
Installs between a 24vdc power supply and 24vdc lights
– Input voltage: DC 12V / 24V
– Output voltage: Same as input voltage
– Output power: 8A (Max. 96W at 12vdc / Max 192W at 24vdc)
– Output Signal PWM
– Simply turn dial to adjust brightness of LED light
– No battery required
– A constant voltage power supply will be needed to provide
the 12vdc or 24vdc input. The output voltage supplied by this
unit will be the same as the input voltage so make sure the
correct PSU is selected for your LEDs
– Dimensions: 89 x 59 x 65mm
Dim our lamps up to:
160 x E14, E10 & Golf ball LED 24v Lamps
128 x LED PIXELS 24v
Specification PDF available on request.
Related products
White Trunking 38mm x 25mm x 3m
Perfect making strip lighting with our Cabochon Lighting Kits!
You will also need:
End Caps
Couplers (If using more than 1 length of trunking)
: 3m
: 38mm
: 25mm
: White
: PVC (Polyvinylchloride)
100w 24v LED Power Supply
Super slim IP67 waterproof LED drivers providing a constant voltage 24vdc regulated
output at up to 4.16A 100W.No minimum load. Can be used for any power rating up to
100W. SELV. Open circuit, short circuit,overload and auto recovery. Class II, lifetime
30,000hrs.
100w 240vac to 24vdc LED Power Supply – Fully encapsulated IP67
Output: 24vdc Constant Voltage
Input voltage: 220-240vac
Input frequency: 50/60Hz
Current: 4.16A
Power : 100w Watts
Protection: Short Circuit, Over voltage protection
Dimensions: 190mm × 52mm × 37mm
AC cord length: 150mm
DC cord length: 150mm
Operating temperature: -20°C to + 45°C
Run up to (our lamps):
83 x E14, E10 & Golf ball LED 24v Lamps
66 x LED PIXELS 24v
