Size of hole required to fit: 27mm
Maximum thickness of material for installation is 5mm
If yours is thicker, you will need to rebate a 40mm area on the back of the material, leaving a max. thickness of 5mm
Golf Ball LED Pixel – 45mm
£3.99 Ex. VAT
A complete 45mm LED weather-proof fitting, that has the LED light source, plastic golf ball cover and spike lamp holder lamp holder inbuilt.
Once installed it sits flush to the mounting material.
Front Dimensions: 45mm D x 50mm H
Colours Available: Warm White (2,700k) & Cool White (10,000k)
Voltage: 24v AC / DC
Wattage: 1.5w
Dimmable: Yes
Warranty: 1 Year
Description
Additional information
| Colour |
Warm White, Cool White |
|---|
Related products
RGB LED T Joint Power Cable – 2.1mm
Used to add more power / transformer to the RGB colour changing lights, after the 26th light (max lights to be run off 1 x 144w power supply).
It allows for another power supply to be connected to the same chain off lights, so only 1 controller is needed.
Put between the 26th and 28th light - no later but can be earlier
IP rated plugs
60mm RGB LED Fitting
Connection cables: 200mm long with IP rated plugs (Give a more secure connection)
Voltage: 24v DC
Wattage: 4.52w
Controller = CLICK HERE
3m RGB LED Extension / Connection Cable = CLICK HERE
Power supply to run up to 4 lights = CLICK HERE
Power supply to run up to 13 lights = CLICK HERE
Power supply to run up to 26 lights = CLICK HERE
55mm H x 60mm D tapering down to 40mm at the base
Thread length: 25mm
Size of hole required to fit: 20mm
Domed LED Pixel – 35mm
A complete 35mm LED weather-proof fitting, that has the LED light source, plastic dome cover and spike lamp holder lamp holder inbuilt.
Once installed it sits flush to the mounting material.
Front Dimensions: 20mm H x 35mm D
Colours Available: Warm White (2,700k), Cool White (10,000k), Red, Green, Blue, Yellow & Pink
Voltage: 24v AC / DC
Wattage: 1.5w
Dimmable: Yes
Warranty: 1 Year
