12v & 24v Rotary Dimmer – 30A
£15.95 Ex. VAT
Installs between a 24vdc power supply and 24vdc lights
– Input voltage: DC 12V / 24V
– Output voltage: Same as input voltage
– Output power: 30A (Max. 360W at 12vdc / Max 720W at 24vdc)
– Output Signal PWM
– Simply turn dial to adjust brightness of LED light
– No battery required
– A constant voltage power supply will be needed to provide
the 12vdc or 24vdc input. The output voltage supplied by this
unit will be the same as the input voltage so make sure the
correct PSU is selected for your LEDs
– Dimensions: 86 x 63 x 35mm
Specification PDF available on request.
Categories: 24v Power Supplies, Dimmer / Flasher Boxes, Wiring Accessories
Related products
100m x 1.5mm² Black Tri Rated Cable (Roll / Drum)
£35.00 Ex. VAT
2.1mm Plug and Socket Cable – 3m
£3.95 Ex. VAT
18w 24v LED Power Supply
£9.99 Ex. VAT
200w 24v LED Power Supply
£49.99 Ex. VAT
200w 240vac to 24vdc LED Power Supply – Fully encapsulated IP67
Output: 24vdc Constant Voltage
Input voltage: 100-305vac
Input frequency: 47 - 63Hz
Current: 8.3A
Power : 200 Watts
Protection: Short Circuit, Over Temperature, Over voltage protection
Dimensions: 199 x 63 x 35.5mm
Weight: 850g
AC cord length: 300mm
DC cord length: 300mm
Operating temperature: -40°C to + 90°C
Run up to (our lamps):
166 x E14, E10 & Golf ball LED 24v Lamps
133 x LED PIXELS 24v
60w 24v LED Power Supply
£19.99 Ex. VAT
Super slim IP67 waterproof LED drivers providing a constant voltage 24vdc regulated output
at up to 2.5A 60W. No minimum load. Can be used for any power rating up to 60W.
SELV. Open circuit, short circuit,overload and auto recovery. Class II, lifetime 30,000hrs.
60w 240vac to 24vdc LED Power Supply – Fully encapsulated IP67
Output: 24vdc Constant Voltage
Input voltage: 220-240vac
Input frequency: 50/60Hz
Current: 2.5A
Power : 60 Watts
Protection: Short Circuit, Over voltage protection
Dimensions: 163mm × 43mm × 33mm
AC cord length: 200mm
DC cord length: 200mm
Operating temperature: -20°C to + 45°C
Run up to (our lamps):
50 x E14, E10 & Golf ball LED 24v Lamps
40 x LED PIXELS 24v
Flasher Box – 3/4, 6, 8, 12 & 16 Channels
£220.00 – £980.00 Ex. VAT
Flasher Box - Each flasher box has numerous programs. Which you can adjust the speed, dimming and motion, with switches on the board.
Channels Available: 3 up to 16
Voltages Available: 24v, 60v, 110v & 240v (all AC)
Amp Per Channel Available: 2.5amp up to 25amp
Each Flasher comes in an IP rated box, with 20mm gland in and 20mm gland out.
24vac power supply to run our 24vac model, can be found HERE
Approx. Lead Times: 24v & 240v = 1 week - 60v & 110v = 3 weeks
If you need a matrix board please contact us: rue@amusementlighting.co.uk
Please note the Harting metal connector shown in the image is on request only
White Trunking 38mm x 25mm End Caps x 10
£11.99 Ex. VAT