| Voltage | 24v (5w), 60v (10w), 240v (10w) |
|---|
Sale
Previous product
Back to products
E10 LED Lamps
£1.69 Ex. VAT £1.52 Ex. VAT
Next product
E10 Incandescent Lamps - Box of 100
£40.00 Ex. VAT £36.00 Ex. VAT
E14 Incandescent Lamps – Box of 50
£20.00 – £35.00 Ex. VAT £18.00 - £31.50 Ex. VAT
Our incandescent lamps are produced at the highest quality and fit perfectly into our compatible cabochon caps and lamp holders.
Fitting: E14 (SES)
Voltages Available: 24v, 60v & 240v AC
Additional information
Related products
E14 Solder Lamp Holder
Strip back the wire to the copper and solder the wire to the lamp holder conductors.
E14 Cabochon Caps
60mm H x 62mm D tapering down to 42mm at the base
Colours Available: Clear, Red, Green, Blue, Yellow, Orange, Purple, White, Pink, Turquoise, Phosph. Pink, Phosph. Orange, Phosph. Green & Phosph. Yellow
Our E14 Cabochons create a strikingly radial effect from the base, while the cap generates highly attractive effects, emitting powerful luminosity from all angles, for all to see.
E14 Lamp Holder Collar
Our lamp holder collar is used when a E14 Cabochon Cap isn’t required. It fastens onto the thread of an E14 lamp holder, to keep it in place. Perfect when using our LED Golf ball.
E14 Spike Lamp Holder
With our spike on holder there is no need to strip the wire back to expose the copper. All you have to do is place the wires in the two openings on the back of the lamp holder (on top of the spikes) and screw the compression nut on to make a connection.
Supplied in 2 parts – Lamp Holder & Compression Nut
E10 Incandescent Lamps – Box of 100
Our incandescent lamps are produced at the highest quality and fit perfectly into our compatible cabochon caps and lamp holders.
Fitting: E10 (MES)
Voltages Available: 24v & 60v AC
E10 LED Lamps
Our Italian made LED lamps, use the highest quality parts and manufacturing process, to guarantee the best light output and long lifespan.
Fitting: E10 (MES)
Voltages Available: 24v, 60v AC / DC
Colours Available: Warm White (2,700k) & Cool White (10,000k)
Dimmable: Yes
E10 Spike Lamp Holder
With our spike on holder there is no need to strip the wire back to expose the copper. All you have to do is place the wires in the two openings on the back of the lamp holder (on top of the spikes) and screw the compression nut on to make a connection.
Supplied in 2 parts – Lamp Holder & Compression Nut
