| Wattage |
15w, 30w, 60w |
|---|
72w Plug in 24v LED Power Supply - RGB
£17.50 Ex. VAT
2.5m Outdoor Green Commercial Christmas Pre Lit Archway
£991.66 Ex. VAT
180w Plug in 24v LED Power Supply
£29.99 Ex. VAT
180w 240vac to 24vdc LED Plug in Style Power Supply – 2.1mm Plug
Additional information
Related products
24w Plug in 24v LED Power Supply
24w 240vac to 24vdc LED Plug in Style Power Supply – 2.1mm Plug
Input voltage: 100-240vac (90-264vac max.)
Input frequency: 47 - 63Hz
Output voltage: 24vdc
Current: 1000mA (1 amp)
Power : 24 Watts
Protection: Short Circuit, Over voltage
Dimensions: 59 x 48 x 29mm
Cord length: 1.5 metres
DC connector: 2.1 x 5.5 x 12mm (Female)
Polarity: +ve (positive) centre
Leakage current: <0.25mA
Operating temperature: 0°C to + 40°C
Run up to (our lamps):
20 x E14, E10 & Golf ball LED 24v Lamps
16 x LED PIXELS 24v
45mm RGB LED Fitting
45mm D x 40mm H tapering down to 30mm at the base
Connection cables: 200mm long with IP rated plugs (Give a more secure connection)
Voltage: 24v DC
Wattage: 2.88w
Protocol: UCS1903
Controller = CLICK HERE
3m RGB LED Extension / Connection Cable = CLICK HERE
Power supply to run up to 6 lights = CLICK HERE
Power supply to run up to 20 lights = CLICK HERE
Power supply to run up to 50 lights = CLICK HERE
Thread length: 25mm
Size of hole required to fit: 20mm
RGB LED T Joint Power Cable – 2.1mm
Used to add more power / transformer to the RGB colour changing lights, after the 26th light (max lights to be run off 1 x 144w power supply).
It allows for another power supply to be connected to the same chain off lights, so only 1 controller is needed.
Put between the 26th and 28th light - no later but can be earlier
IP rated plugs
Domed LED Pixel – 35mm
A complete 35mm LED weather-proof fitting, that has the LED light source, plastic dome cover and spike lamp holder lamp holder inbuilt.
Once installed it sits flush to the mounting material.
Front Dimensions: 20mm H x 35mm D
Colours Available: Warm White (2,700k), Cool White (10,000k), Red, Green, Blue, Yellow & Pink
Voltage: 24v AC / DC
Wattage: 1.5w
Dimmable: Yes
Warranty: 1 Year
12v & 24v Rotary Dimmer – 30A
Installs between a 24vdc power supply and 24vdc lights
- Input voltage: DC 12V / 24V
- Output voltage: Same as input voltage
- Output power: 30A (Max. 360W at 12vdc / Max 720W at 24vdc)
- Output Signal PWM
- Simply turn dial to adjust brightness of LED light
- No battery required
- A constant voltage power supply will be needed to provide
the 12vdc or 24vdc input. The output voltage supplied by this
unit will be the same as the input voltage so make sure the
correct PSU is selected for your LEDs
- Dimensions: 86 x 63 x 35mm
Specification PDF available on request.
