24v RGB LED Controller
£5.29 Ex. VAT
RGB LED T Joint Power Cable - 2.1mm
£1.99 Ex. VAT
180w Plug in 24v LED Power Supply
£32.50 Ex. VAT
180w 240vac to 24vdc LED Plug in Style Power Supply – 2.1mm Plug
Related products
Domed LED Pixel – 35mm
A complete 35mm LED weather-proof fitting, that has the LED light source, plastic dome cover and spike lamp holder lamp holder inbuilt.
Once installed it sits flush to the mounting material.
Front Dimensions: 20mm H x 35mm D
Colours Available: Warm White (2,700k), Cool White (10,000k), Red, Green, Blue, Yellow & Pink
Voltage: 24v AC / DC
Wattage: 1.5w
Dimmable: Yes
Warranty: 1 Year
Golf Ball LED Pixel – 45mm
A complete 45mm LED weather-proof fitting, that has the LED light source, plastic golf ball cover and spike lamp holder lamp holder inbuilt.
Once installed it sits flush to the mounting material.
Front Dimensions: 45mm D x 50mm H
Colours Available: Warm White (2,700k) & Cool White (10,000k)
Voltage: 24v AC / DC
Wattage: 1.5w
Dimmable: Yes
Warranty: 1 Year
100w 24v LED Power Supply
Super slim IP67 waterproof LED drivers providing a constant voltage 24vdc regulated
output at up to 4.16A 100W.No minimum load. Can be used for any power rating up to
100W. SELV. Open circuit, short circuit,overload and auto recovery. Class II, lifetime
30,000hrs.
100w 240vac to 24vdc LED Power Supply – Fully encapsulated IP67
Output: 24vdc Constant Voltage
Input voltage: 220-240vac
Input frequency: 50/60Hz
Current: 4.16A
Power : 100w Watts
Protection: Short Circuit, Over voltage protection
Dimensions: 190mm × 52mm × 37mm
AC cord length: 150mm
DC cord length: 150mm
Operating temperature: -20°C to + 45°C
Run up to (our lamps):
83 x E14, E10 & Golf ball LED 24v Lamps
66 x LED PIXELS 24v
2000w / 2000VA – 24v AC Power Supply
2000w / 2000VA - 24v AC Power Supply
These are perfect to be used with our 24vac flasher / chaser boxes found HERE
Low voltage lighting transformers are double wound isolating types, enclosed and encapsulated in black corrosion resistant GRP IP55 cases, with Metal Galvanized and painted back plates for wall, floor or pole mounting.
20mm gland in and 20mm gland out.
Output: 24vac
Input voltage: 230/240v
Power : 2000 Watts
Protection: S/POLE MCB
Dimensions: 169mm x 169mm x 205mm
Please note that the back plates will protrude 25mm either side of the case.
60mm RGB LED Fitting
60mm D x 55mm H tapering down to 40mm at the base
Connection cables: 200mm long with IP rated plugs (Give a more secure connection)
Voltage: 24v DC
Wattage: 4.32w
Protocol: UCS1903
Controller = CLICK HERE
3m RGB LED Extension / Connection Cable = CLICK HERE
Power supply to run up to 4 lights = CLICK HERE
Power supply to run up to 13 lights = CLICK HERE
Power supply to run up to 33 lights = CLICK HERE
Thread length: 25mm
Size of hole required to fit: 20mm
RGB LED T Joint Power Cable – 2.1mm
Used to add more power / transformer to the RGB colour changing lights, after the 26th light (max lights to be run off 1 x 144w power supply).
It allows for another power supply to be connected to the same chain off lights, so only 1 controller is needed.
Put between the 26th and 28th light - no later but can be earlier
IP rated plugs
