From £0.60 Ex. VAT
With our spike on holder there is no need to strip the wire back to expose the copper. All you have to do is place the wires in the two openings on the back of the lamp holder (on top of the spikes) and screw the compression nut on to make a connection.
Supplied in 2 parts – Lamp Holder & Compression Nut
Thread length: 20mm
Size of hole required to fit: 16mm
Maximum wattage lamp to be used: 10w
Maximum thickness of material for installation is 10mm
If yours is thicker, you will need to rebate a 40mm area on the back of the material, leaving a max thickness of 10mm
| Dimensions | 20 cm |
|---|
