Showing 49–63 of 63 results
45mm RGB LED Fitting
45mm D x 40mm H tapering down to 30mm at the base
Connection cables: 200mm long with IP rated plugs (Give a more secure connection)
Voltage: 24v DC
Wattage: 2.88w
Protocol: UCS1903
Controller = CLICK HERE
3m RGB LED Extension / Connection Cable = CLICK HERE
Power supply to run up to 6 lights = CLICK HERE
Power supply to run up to 20 lights = CLICK HERE
Power supply to run up to 50 lights = CLICK HERE
Thread length: 25mm
Size of hole required to fit: 20mm
60mm RGB LED Fitting
60mm D x 55mm H tapering down to 40mm at the base
Connection cables: 200mm long with IP rated plugs (Give a more secure connection)
Voltage: 24v DC
Wattage: 4.32w
Protocol: UCS1903
Controller = CLICK HERE
3m RGB LED Extension / Connection Cable = CLICK HERE
Power supply to run up to 4 lights = CLICK HERE
Power supply to run up to 13 lights = CLICK HERE
Power supply to run up to 33 lights = CLICK HERE
Thread length: 25mm
Size of hole required to fit: 20mm
RGB LED T Joint Power Cable – 2.1mm
Used to add more power / transformer to the RGB colour changing lights, after the 26th light (max lights to be run off 1 x 144w power supply).
It allows for another power supply to be connected to the same chain off lights, so only 1 controller is needed.
Put between the 26th and 28th light - no later but can be earlier
IP rated plugs
2-Port Lever Connector
2.1mm Plug and Socket Cable – 3m
12v & 24v Rotary Dimmer – 30A
Installs between a 24vdc power supply and 24vdc lights
- Input voltage: DC 12V / 24V
- Output voltage: Same as input voltage
- Output power: 30A (Max. 360W at 12vdc / Max 720W at 24vdc)
- Output Signal PWM
- Simply turn dial to adjust brightness of LED light
- No battery required
- A constant voltage power supply will be needed to provide
the 12vdc or 24vdc input. The output voltage supplied by this
unit will be the same as the input voltage so make sure the
correct PSU is selected for your LEDs
- Dimensions: 86 x 63 x 35mm
Specification PDF available on request.
3-Port Lever Connector
E27 2w Dimmable LED Filament Festoon Lamps / Bulbs – Plastic Lens
High power E27 (ES) LED festoon lamps, for our connectable festoon belts and for all other 240V belt and harness lighting.
Our LED filament festoon lamp has been designed to mimic the look of a traditional incandescent pygmy lamp but at the same time having all the benefits of LED!
The lens of the lamp is a shatterproof clear plastic, reducing problems associated with traditional glass lamps.
Available in Warm White & Cool White
Indoor & Outdoor use
Lamp Dimensions: 6cm H x 4.5cm D (G45 Golfball)
Wattage: 2w
Lumens: 108
Voltage: 240v
Warranty: 1 Year
Select options
This product has multiple variants. The options may be chosen on the product page
LED Festoon Lamps – 2w – E27 / B22
LED festoon lamps available in E27 and B22, for our connectable festoon belts and for all other 240V belt and harness lighting.
The lens of the lamp is a shatterproof frosted plastic, reducing problems associated with traditional glass lamps.
Available in Warm White
Indoor & Outdoor use
Lamp Dimensions: 6cm H x 4.5cm D (G45 Golfball)
Wattage: 2w
Voltage: 240v
Warranty: 1 Year
Select options
This product has multiple variants. The options may be chosen on the product page
Festoon Belt Extension Cable
5 and 10 Metre Black Extension Cable for our connectable festoon range.
Extend the distance between the plug and the first length of connectable festoon or between two lengths of connectable festoon.
Multiple extension cables can be connected together to increase length as required.
Select options
This product has multiple variants. The options may be chosen on the product page
Starter Cable for Festoon Belts
Starter Cable for Festoon Belts – 16amp
Connectable Festoon Belts – E27
Connect multiple sets together to meet your required length. Up to 1,500m!
Outdoor, black rubber cable, connectable festoon set measures:
5 metres in length and comes with either 10 x sockets (one every 0.5m) or 15x sockets (one every 0.33m)
10 metres in length and comes with either 10 x sockets (one every 1m) or 20 x sockets (one every 0.5m)
These festoon belts are manufactured using the latest construction processes, to ensure excellent durability with strong weatherproof seals, for prolonged use for commercial and domestic displays.
There are fixing points on each socket, so you can easily screw into walls for a more secure fix.
What else do you need?
Starter Cable with UK plug - HERE
LED Festoon Lamps - HERE
Voltage: 240v
Indoor & Outdoor use (IP55)
Select options
This product has multiple variants. The options may be chosen on the product page
1,350w Professional Series LED Floodlight – Made in Italy – 7 Years Warranty
1,350w High Power LED Floodlight
Beam angle: 70° (24°, 28°, 55°, 65° available on request)
Colour available: 3000k, 4000k, 5000k, 5700k
7 Years Warranty
680mm W x 710mm H x 255mm D
28.5 KG
Made in Italy
Delivery 3-4 weeks
Specification Below
Select options
This product has multiple variants. The options may be chosen on the product page
