| Wattage |
15w, 30w, 60w |
|---|
72w Plug in 24v LED Power Supply - RGB
£17.50 Ex. VAT
2.5m Outdoor Green Commercial Christmas Pre Lit Archway
£991.66 Ex. VAT
180w Plug in 24v LED Power Supply
£29.99 Ex. VAT
180w 240vac to 24vdc LED Plug in Style Power Supply – 2.1mm Plug
Additional information
Related products
2000w / 2000VA – 24v AC Power Supply
2000w / 2000VA - 24v AC Power Supply
These are perfect to be used with our 24vac flasher / chaser boxes found HERE
Low voltage lighting transformers are double wound isolating types, enclosed and encapsulated in black corrosion resistant GRP IP55 cases, with Metal Galvanized and painted back plates for wall, floor or pole mounting.
20mm gland in and 20mm gland out.
Output: 24vac
Input voltage: 230/240v
Power : 2000 Watts
Protection: S/POLE MCB
Dimensions: 169mm x 169mm x 205mm
Please note that the back plates will protrude 25mm either side of the case.
200w 24v LED Power Supply
200w 240vac to 24vdc LED Power Supply – Fully encapsulated IP67
Output: 24vdc Constant Voltage
Input voltage: 100-305vac
Input frequency: 47 - 63Hz
Current: 8.3A
Power : 200 Watts
Protection: Short Circuit, Over Temperature, Over voltage protection
Dimensions: 199 x 63 x 35.5mm
Weight: 850g
AC cord length: 300mm
DC cord length: 300mm
Operating temperature: -40°C to + 90°C
Run up to (our lamps):
166 x E14, E10 & Golf ball LED 24v Lamps
133 x LED PIXELS 24v
45mm RGB LED Fitting
45mm D x 40mm H tapering down to 30mm at the base
Connection cables: 200mm long with IP rated plugs (Give a more secure connection)
Voltage: 24v DC
Wattage: 2.88w
Protocol: UCS1903
Controller = CLICK HERE
3m RGB LED Extension / Connection Cable = CLICK HERE
Power supply to run up to 6 lights = CLICK HERE
Power supply to run up to 20 lights = CLICK HERE
Power supply to run up to 50 lights = CLICK HERE
Thread length: 25mm
Size of hole required to fit: 20mm
12v & 24v Rotary Dimmer – 30A
Installs between a 24vdc power supply and 24vdc lights
- Input voltage: DC 12V / 24V
- Output voltage: Same as input voltage
- Output power: 30A (Max. 360W at 12vdc / Max 720W at 24vdc)
- Output Signal PWM
- Simply turn dial to adjust brightness of LED light
- No battery required
- A constant voltage power supply will be needed to provide
the 12vdc or 24vdc input. The output voltage supplied by this
unit will be the same as the input voltage so make sure the
correct PSU is selected for your LEDs
- Dimensions: 86 x 63 x 35mm
Specification PDF available on request.
RGB LED T Joint Power Cable – 2.1mm
Used to add more power / transformer to the RGB colour changing lights, after the 26th light (max lights to be run off 1 x 144w power supply).
It allows for another power supply to be connected to the same chain off lights, so only 1 controller is needed.
Put between the 26th and 28th light - no later but can be earlier
IP rated plugs
